Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
T11 T Seat in Clear.
Due to the wide range of seat sizes and options available, please email us before placing your order to confirm that your required seat is in stock sales@nextkarting.co.uk. Any seat combination can be manufactured if not currently in stock; however, this will take approximately 2–4 weeks
T11T KART SEAT – MEDIUM FLEXIBILTY OPTION
The T11 kart seat is a World Championship winning product.
The T11 shape is the most popular for adult sized karts, typically used by manufacturers and professional kart racing teams.
This model has a flat base and a mid-angle reclined back. This design was created to position the driver lower in the kart whilst allowing a more powerful upright shoulder turn, giving the driver more control.
For drivers with a long torso, the T9.5 is further reclined.
KEY FEATURES
The T11 range offer four rigidities. T11t is between the stiffest rigidity - standard and the flexible VG. See rigidity chart for a further understanding.
The T11 model has a flat base and a 58° reclined back for a lower seating position.
T11t has less rear wheel lift when compared to the more flexible seat rigidities.
Approximate weight 1.3kg.
T11t is frequently used by OK and KZ.
Made with high strength resin.
Wide range of sizes available to order.
Used by professional teams and manufacturers.
Highly developed moulding technique, designed and manufactured in the UK.
For best results we recommend pairing this seat with one of our Tillett P1 rib protectors, see optional product list below.
Most chassis use a standard setup which includes additional upper seat stays. If these are not to be used, it is recommended to fit the TK7 Seat support plates on the main upper stay points. See recommended product list below.
Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
Due to the wide range of seat sizes and options available, please email us before placing your order to confirm that your required seat is in stock sales@nextkarting.co.uk. Any seat combination can be manufactured if not currently in stock; however, this will take approximately 2–4 weeks
The T9.5 shape was made for taller drivers. It has a 48° reclined back, allowing drivers with taller torsos to position themselves lower in the kart.
The T9.5 shape is another model made using Tillett’s special manufacturing technique; this is shown by its smooth surface front and back.
KEY FEATURES
The T9.5 range offer three rigidities. T9.5VTI is the softest rigidity we offer in the T11 range. See image rigidity chart for a better understanding.
T9.5VTI is the softest rigidity on offer and produces maximum rear wheel lift from stiffer seat models. Typically, we find the VTI rigidity is more popular because of the higher level of flexibility.
It has a 48° reclined position, allowing drivers with taller torsos to sit lower in the kart.
Approximate weight 900g.
Made to order in our UK headquarters.
High strength resin.
Glossy finish on both sides.
Sizes available to order, MS, ML, L & XL.
Used by professional teams and manufacturers.
Highly developed moulding technique, designed and manufactured in the UK.
Most chassis use a standard setup which includes additional upper seat stays. If these are not to be used, it is recommended to fit the TK7 seat support plates on the main upper stay points.
For best results we recommend pairing this seat with one of our Tillett P1 rib protectors.
See recommended optional extras.
Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
Due to the wide range of seat sizes and options available, please email us before placing your order to confirm that your required seat is in stock sales@nextkarting.co.uk. Any seat combination can be manufactured if not currently in stock; however, this will take approximately 2–4 weeks
The T9.5 shape was made for taller drivers. It has a 48° reclined back, allowing drivers with taller torsos to position themselves lower in the kart.
The T9.5 shape is another model made using Tillett’s special manufacturing technique; this is shown by its smooth surface front and back.
KEY FEATURES
The T9.5 range offer three rigidities. T9.5VTI is the softest rigidity we offer in the T11 range. See image rigidity chart for a better understanding.
T9.5VTI is the softest rigidity on offer and produces maximum rear wheel lift from stiffer seat models. Typically, we find the VTI rigidity is more popular because of the higher level of flexibility.
It has a 48° reclined position, allowing drivers with taller torsos to sit lower in the kart.
Approximate weight 900g.
Made to order in our UK headquarters.
High strength resin.
Glossy finish on both sides.
Sizes available to order, MS, ML, L & XL.
Used by professional teams and manufacturers.
Highly developed moulding technique, designed and manufactured in the UK.
Most chassis use a standard setup which includes additional upper seat stays. If these are not to be used, it is recommended to fit the TK7 seat support plates on the main upper stay points.
For best results we recommend pairing this seat with one of our Tillett P1 rib protectors.
See recommended optional extras.
Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
Due to the wide range of seat sizes and options available, please email us before placing your order to confirm that your required seat is in stock sales@nextkarting.co.uk. Any seat combination can be manufactured if not currently in stock; however, this will take approximately 2–4 weeks
The T9.5 shape was made for taller drivers. It has a 48° reclined back, allowing drivers with taller torsos to position themselves lower in the kart.
The T9.5 shape is another model made using Tillett’s special manufacturing technique; this is shown by its smooth surface front and back.
KEY FEATURES
The T9.5 range offer three rigidities. T9.5VTI is the softest rigidity we offer in the T11 range. See image rigidity chart for a better understanding.
T9.5VTI is the softest rigidity on offer and produces maximum rear wheel lift from stiffer seat models. Typically, we find the VTI rigidity is more popular because of the higher level of flexibility.
It has a 48° reclined position, allowing drivers with taller torsos to sit lower in the kart.
Approximate weight 900g.
Made to order in our UK headquarters.
High strength resin.
Glossy finish on both sides.
Sizes available to order, MS, ML, L & XL.
Used by professional teams and manufacturers.
Highly developed moulding technique, designed and manufactured in the UK.
Most chassis use a standard setup which includes additional upper seat stays. If these are not to be used, it is recommended to fit the TK7 seat support plates on the main upper stay points.
For best results we recommend pairing this seat with one of our Tillett P1 rib protectors.
See recommended optional extras.
Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
Due to the wide range of seat sizes and options available, please email us before placing your order to confirm that your required seat is in stock sales@nextkarting.co.uk. Any seat combination can be manufactured if not currently in stock; however, this will take approximately 2–4 weeks
The T5 kart seat is a World Championship winning product, used by Lando Norris.
The T5 shape is now days predominantly used by younger or smaller drivers.
This model has a flat bottom and a more upright back position. The 63° back angle allows a powerful shoulder turn, which helps the very young racers.
With the T5 model, Tillett created the first ever “flat bottom” style seat. This innovation was eventually replicated by many other brands, as the iconic design feature gives a favourable performance advantage.
The T5 range offer four rigidities. T5VG is between the T5t and the softest rigidity T5VTi. See rigidity chart below for a better understanding.
KEY FEATURES
T5VG is between the T5t and the softest rigidity T5VTi. See image rigidity chart for a better understanding.
The T5 model has a flat base and a 63° upright seating position for additional power in the shoulders.
The T5 seat is the most popular shape for drivers aged 8-12 years.
The T5VG is predominantly used by small junior drivers in full sized karts.
Used in classes such as OKJ, Mini x30 and Minimax.
T5VG is one of the softer rigidities on offer and produces more rear wheel lift from stiffer seat models. Typically, we find the VG seats are more popular because of their level of flexibility.
Approximate weight 1kg.
Made with high strength resin.
Sizes available Ccd, CL and XScd.
Made to order in headquarters.
Used by professional teams and manufacturers.
Highly developed moulding technique, designed and manufactured in the UK.
For best results we recommend pairing this seat with one of our Tillett P1 rib protectors.
Most chassis use a standard setup which includes additional upper seat stays. If these are not to be used, it is recommended to fit the TK7 seat support plates on the main upper stay points.
See recommended optional extras.
Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
Due to the wide range of seat sizes and options available, please email us before placing your order to confirm that your required seat is in stock sales@nextkarting.co.uk. Any seat combination can be manufactured if not currently in stock; however, this will take approximately 2–4 weeks
The T5 kart seat is a World Championship winning product, used by Lando Norris.
The T5 shape is now days predominantly used by younger or smaller drivers.
This model has a flat bottom and a more upright back position. The 63° back angle allows a powerful shoulder turn, which helps the very young racers.
With the T5 model, Tillett created the first ever “flat bottom” style seat. This innovation was eventually replicated by many other brands, as the iconic design feature gives a favourable performance advantage.
The T5 range offer four rigidities. T5VG is between the T5t and the softest rigidity T5VTi. See rigidity chart below for a better understanding.
KEY FEATURES
T5VG is between the T5t and the softest rigidity T5VTi. See image rigidity chart for a better understanding.
The T5 model has a flat base and a 63° upright seating position for additional power in the shoulders.
The T5 seat is the most popular shape for drivers aged 8-12 years.
The T5VG is predominantly used by small junior drivers in full sized karts.
Used in classes such as OKJ, Mini x30 and Minimax.
T5VG is one of the softer rigidities on offer and produces more rear wheel lift from stiffer seat models. Typically, we find the VG seats are more popular because of their level of flexibility.
Approximate weight 1kg.
Made with high strength resin.
Sizes available Ccd, CL and XScd.
Made to order in headquarters.
Used by professional teams and manufacturers.
Highly developed moulding technique, designed and manufactured in the UK.
For best results we recommend pairing this seat with one of our Tillett P1 rib protectors.
Most chassis use a standard setup which includes additional upper seat stays. If these are not to be used, it is recommended to fit the TK7 seat support plates on the main upper stay points.
See recommended optional extras.
Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
Due to the wide range of seat sizes and options available, please email us before placing your order to confirm that your required seat is in stock sales@nextkarting.co.uk. Any seat combination can be manufactured if not currently in stock; however, this will take approximately 2–4 weeks
THE NEW T15 KART RACING SEAT
Back by popular demand is a shape which has been successfully used since the late eighties.
The T15 is based around the very popular T7 / T8. This shape has always been very comfortable with its small flat, leg support and anti submarine front kickup, but most importantly the deeper sides and curved back make it the best solution to effectively support a deep chested driver.
When the old injection T8 moulds died after 25 years of continuous production, the customers relying on this shape were disappointed. Therefore, a decision was made to reintroduce the popular shape and at the same time bring it up to date. As these customers were almost all using the larger sizes we selected the ML, L, XL and XXL as the range that would be re-introduced as the T15 and they were to be made in the latest manufacturing process, which gives a perfect laminate of quality and consistency.
Each size was adapted to take account of the requirements to the modern requirement to use rib protectors and the full range of rigidities made available for both modern and historic karts.
KEY FEATURES
Super comfortable and supportive shape.
The best seat for a deep chested driver.
A slightly more upright 58° angle which suits Historic karts as with the older chassis it helps to get the weight off the rear axle.
A narrowback on the seat helps pro kart racers fit an XL, XXL seat between the engines.
Sizes designed to suit the larger drivers; ML, L, XL and XXL
Full range of rigidities available. T15VTi, T15VG, T15t and T15 standard.
For best results and driver safety we recommend pairing this seat with one of our Tillett P1 rib protectors.
Most chassis use a standard setup which includes additional upper seat stays. If these are not to be used, it is recommended tofit the TK7 Seat support plates on the main upper stay points. See recommended product list below.
Highly developed moulding technique, designedand manufactured in the UK with supreme accuracy.
Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
Due to the wide range of seat sizes and options available, please email us before placing your order to confirm that your required seat is in stock sales@nextkarting.co.uk. Any seat combination can be manufactured if not currently in stock; however, this will take approximately 2–4 weeks
THE NEW T15 KART RACING SEAT
Back by popular demand is a shape which has been successfully used since the late eighties.
The T15 is based around the very popular T7 / T8. This shape has always been very comfortable with its small flat, leg support and anti submarine front kickup, but most importantly the deeper sides and curved back make it the best solution to effectively support a deep chested driver.
When the old injection T8 moulds died after 25 years of continuous production, the customers relying on this shape were disappointed. Therefore, a decision was made to reintroduce the popular shape and at the same time bring it up to date. As these customers were almost all using the larger sizes we selected the ML, L, XL and XXL as the range that would be re-introduced as the T15 and they were to be made in the latest manufacturing process, which gives a perfect laminate of quality and consistency.
Each size was adapted to take account of the requirements to the modern requirement to use rib protectors and the full range of rigidities made available for both modern and historic karts.
KEY FEATURES
Super comfortable and supportive shape.
The best seat for a deep chested driver.
A slightly more upright 58° angle which suits Historic karts as with the older chassis it helps to get the weight off the rear axle.
A narrowback on the seat helps pro kart racers fit an XL, XXL seat between the engines.
Sizes designed to suit the larger drivers; ML, L, XL and XXL
Full range of rigidities available. T15VTi, T15VG, T15t and T15 standard.
For best results and driver safety we recommend pairing this seat with one of our Tillett P1 rib protectors.
Most chassis use a standard setup which includes additional upper seat stays. If these are not to be used, it is recommended tofit the TK7 Seat support plates on the main upper stay points. See recommended product list below.
Highly developed moulding technique, designedand manufactured in the UK with supreme accuracy.
Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
Due to the wide range of seat sizes and options available, please email us before placing your order to confirm that your required seat is in stock sales@nextkarting.co.uk. Any seat combination can be manufactured if not currently in stock; however, this will take approximately 2–4 weeks
THE NEW T15 KART RACING SEAT
Back by popular demand is a shape which has been successfully used since the late eighties.
The T15 is based around the very popular T7 / T8. This shape has always been very comfortable with its small flat, leg support and anti submarine front kickup, but most importantly the deeper sides and curved back make it the best solution to effectively support a deep chested driver.
When the old injection T8 moulds died after 25 years of continuous production, the customers relying on this shape were disappointed. Therefore, a decision was made to reintroduce the popular shape and at the same time bring it up to date. As these customers were almost all using the larger sizes we selected the ML, L, XL and XXL as the range that would be re-introduced as the T15 and they were to be made in the latest manufacturing process, which gives a perfect laminate of quality and consistency.
Each size was adapted to take account of the requirements to the modern requirement to use rib protectors and the full range of rigidities made available for both modern and historic karts.
KEY FEATURES
Super comfortable and supportive shape.
The best seat for a deep chested driver.
A slightly more upright 58° angle which suits Historic karts as with the older chassis it helps to get the weight off the rear axle.
A narrowback on the seat helps pro kart racers fit an XL, XXL seat between the engines.
Sizes designed to suit the larger drivers; ML, L, XL and XXL
Full range of rigidities available. T15VTi, T15VG, T15t and T15 standard.
For best results and driver safety we recommend pairing this seat with one of our Tillett P1 rib protectors.
Most chassis use a standard setup which includes additional upper seat stays. If these are not to be used, it is recommended tofit the TK7 Seat support plates on the main upper stay points. See recommended product list below.
Highly developed moulding technique, designedand manufactured in the UK with supreme accuracy.
Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
Due to the wide range of seat sizes and options available, please email us before placing your order to confirm that your required seat is in stock sales@nextkarting.co.uk. Any seat combination can be manufactured if not currently in stock; however, this will take approximately 2–4 weeks
THE NEW T15 KART RACING SEAT
Back by popular demand is a shape which has been successfully used since the late eighties.
The T15 is based around the very popular T7 / T8. This shape has always been very comfortable with its small flat, leg support and anti submarine front kickup, but most importantly the deeper sides and curved back make it the best solution to effectively support a deep chested driver.
When the old injection T8 moulds died after 25 years of continuous production, the customers relying on this shape were disappointed. Therefore, a decision was made to reintroduce the popular shape and at the same time bring it up to date. As these customers were almost all using the larger sizes we selected the ML, L, XL and XXL as the range that would be re-introduced as the T15 and they were to be made in the latest manufacturing process, which gives a perfect laminate of quality and consistency.
Each size was adapted to take account of the requirements to the modern requirement to use rib protectors and the full range of rigidities made available for both modern and historic karts.
KEY FEATURES
Super comfortable and supportive shape.
The best seat for a deep chested driver.
A slightly more upright 58° angle which suits Historic karts as with the older chassis it helps to get the weight off the rear axle.
A narrowback on the seat helps pro kart racers fit an XL, XXL seat between the engines.
Sizes designed to suit the larger drivers; ML, L, XL and XXL
Full range of rigidities available. T15VTi, T15VG, T15t and T15 standard.
For best results and driver safety we recommend pairing this seat with one of our Tillett P1 rib protectors.
Most chassis use a standard setup which includes additional upper seat stays. If these are not to be used, it is recommended tofit the TK7 Seat support plates on the main upper stay points. See recommended product list below.
Highly developed moulding technique, designedand manufactured in the UK with supreme accuracy.
Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
The T14 shape is the newest model in our kart seat range.
Due to the wide range of seat sizes and options available, please email us before placing your order to confirm that your required seat is in stock sales@nextkarting.co.uk. Any seat combination can be manufactured if not currently in stock; however, this will take approximately 2–4 weeks
The seat has been released initially for smaller drivers, with an upright back position and additional leg support. The T14 takes the place of the discontinued T8 which also had leg support.
Currently the T14 is only available in the smaller Cadet/Minikart sizes, Mini, Ccd, CL and XScd.
The reason for only having four small sizes is that older juniors and adults are typically strong enough and bracing with the legs is not necessary. The extra width of the leg support can also be a problem with adult sizes, as it miss-aligns the sensitive airbox on many engine combinations. However, the added support can be ideal for classes where a particularly small or inexperienced driver struggles to control a faster kart.
T14VTI is what we call a soft rigidity seat. The VTI rigidity offers more rear wheel from stiffer seat models. Typically, we find the VTI seats are popular because of their level of flexibility.
See our rigidity chart for a further understanding.
KEY FEATURES
The T14 range offer three rigidities. T14VG is the medium specification available.
The T14 shape has a flat base, and an upright back angle for a more powerful shoulder turn when steering.
Additional leg support to help assist kart control.
T14VTI is the softer rigidity on offer and produces more rear wheel lift from stiffer seat models such as the T14t or T14VG. Typically, we find the VTI seats are popular because they’re level off legibility allows the driver to lift the rear and use the power in the shoulders to turn the kart into the corners at high speed.
Approximate weight 1.3kg.
T14 is most used by drivers aged 8-12 years old.
Lightweight and high strength, with smooth easy to clean surfaces.
precision cut for consistency of parts.
Available to order in sizes, Mini, Ccd, CL and XScd.
Highly developed moulding technique, designed and manufactured in the UK with supreme accuracy.
For best results and driver safety we recommend pairing this seat with one of our Tillett P1 rib protectors.
Most chassis use a standard setup which includes additional upper seat stays. If these are not to be used, it is recommended to fit the TK7 Seat support plates on the main upper stay points. See recommended product list below.
Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
The T14 shape is the newest model in our kart seat range.
Due to the wide range of seat sizes and options available, please email us before placing your order to confirm that your required seat is in stock sales@nextkarting.co.uk. Any seat combination can be manufactured if not currently in stock; however, this will take approximately 2–4 weeks
The seat has been released initially for smaller drivers, with an upright back position and additional leg support. The T14 takes the place of the discontinued T8 which also had leg support.
Currently the T14 is only available in the smaller Cadet/Minikart sizes, Mini, Ccd, CL and XScd.
The reason for only having four small sizes is that older juniors and adults are typically strong enough and bracing with the legs is not necessary. The extra width of the leg support can also be a problem with adult sizes, as it miss-aligns the sensitive airbox on many engine combinations. However, the added support can be ideal for classes where a particularly small or inexperienced driver struggles to control a faster kart.
T14VTI is what we call a soft rigidity seat. The VTI rigidity offers more rear wheel from stiffer seat models. Typically, we find the VTI seats are popular because of their level of flexibility.
See our rigidity chart for a further understanding.
KEY FEATURES
The T14 range offer three rigidities. T14VG is the medium specification available.
The T14 shape has a flat base, and an upright back angle for a more powerful shoulder turn when steering.
Additional leg support to help assist kart control.
T14VTI is the softer rigidity on offer and produces more rear wheel lift from stiffer seat models such as the T14t or T14VG. Typically, we find the VTI seats are popular because they’re level off legibility allows the driver to lift the rear and use the power in the shoulders to turn the kart into the corners at high speed.
Approximate weight 1.3kg.
T14 is most used by drivers aged 8-12 years old.
Lightweight and high strength, with smooth easy to clean surfaces.
precision cut for consistency of parts.
Available to order in sizes, Mini, Ccd, CL and XScd.
Highly developed moulding technique, designed and manufactured in the UK with supreme accuracy.
For best results and driver safety we recommend pairing this seat with one of our Tillett P1 rib protectors.
Most chassis use a standard setup which includes additional upper seat stays. If these are not to be used, it is recommended to fit the TK7 Seat support plates on the main upper stay points. See recommended product list below.
Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
The T14 shape is the newest model in our kart seat range.
Due to the wide range of seat sizes and options available, please email us before placing your order to confirm that your required seat is in stock sales@nextkarting.co.uk. Any seat combination can be manufactured if not currently in stock; however, this will take approximately 2–4 weeks
The seat has been released initially for smaller drivers, with an upright back position and additional leg support. The T14 takes the place of the discontinued T8 which also had leg support.
Currently the T14 is only available in the smaller Cadet/Minikart sizes, Mini, Ccd, CL and XScd.
The reason for only having four small sizes is that older juniors and adults are typically strong enough and bracing with the legs is not necessary. The extra width of the leg support can also be a problem with adult sizes, as it miss-aligns the sensitive airbox on many engine combinations. However, the added support can be ideal for classes where a particularly small or inexperienced driver struggles to control a faster kart.
T14VTI is what we call a soft rigidity seat. The VTI rigidity offers more rear wheel from stiffer seat models. Typically, we find the VTI seats are popular because of their level of flexibility.
See our rigidity chart for a further understanding.
KEY FEATURES
The T14 range offer three rigidities. T14VG is the medium specification available.
The T14 shape has a flat base, and an upright back angle for a more powerful shoulder turn when steering.
Additional leg support to help assist kart control.
T14VTI is the softer rigidity on offer and produces more rear wheel lift from stiffer seat models such as the T14t or T14VG. Typically, we find the VTI seats are popular because they’re level off legibility allows the driver to lift the rear and use the power in the shoulders to turn the kart into the corners at high speed.
Approximate weight 1.3kg.
T14 is most used by drivers aged 8-12 years old.
Lightweight and high strength, with smooth easy to clean surfaces.
precision cut for consistency of parts.
Available to order in sizes, Mini, Ccd, CL and XScd.
Highly developed moulding technique, designed and manufactured in the UK with supreme accuracy.
For best results and driver safety we recommend pairing this seat with one of our Tillett P1 rib protectors.
Most chassis use a standard setup which includes additional upper seat stays. If these are not to be used, it is recommended to fit the TK7 Seat support plates on the main upper stay points. See recommended product list below.
Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
V PADS – REMOVABLE FOAM HIP PADS FOR KART SEATS
The Tillett V pads are made for the rib area and contain a special anti-shock foam which absorbs impact and adds that extra bit of comfort if a rib protector is not worn. They replace the need for our permanent ¼ covering and by changing the thickness can be used to size a driver with a narrow chest. V pads are especially useful in stopping a hard-shell rib protector from pinching the fabric against a bolt head, creating an aggressive pressure point and wearing holes in the race suit.
KEY FEATURES
Specialist shock absorbing foam for additional comfort.
Non-permanent makes for an easy seat adaption if needed.
Covered in dynamica faux suede – for added grip.
Strong Velcro fixing for easy application.
Protects racing suits from damage often inflicted from the seat bolt heads.
Two sizes available (S and L).
Two colours available (Blue and Black).
5mm thickness
Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
T11 VG Seat in White.
Due to the wide range of seat sizes and options available, please email us before placing your order to confirm that your required seat is in stock sales@nextkarting.co.uk. Any seat combination can be manufactured if not currently in stock; however, this will take approximately 2–4 weeks
T11VG KART SEAT – MEDIUM/SOFT FLEXIBILTY OPTION
The T11 kart seat is a World Championship winning product.
The T11 shape is the most popular for adult sized karts, typically used by manufacturers and professional kart racing teams.
This model has a flat base and a mid-angle reclined back. This design was created to position the driver lower in the kart whilst allowing a more powerful upright shoulder turn, giving the driver more control.
For drivers with a long torso, the T9.5 is further reclined.
KEY FEATURES
The T11 range offer four rigidities. T11VG is between the T11t and the T11VTi. See image diagram below for a better understanding.
T11VG is currently the most popular in adult classes.
The T11 model has a flat base and a 58° reclined back for a lower seating position.
T11VG is one of the softer rigidities on offer and produces more rear wheel lift from stiffer seat models. Typically, we find the VG seats are more popular because of their level of flexibility.
Approximate weight 1kg.
T11VG is frequently used by Rotax and most recently OK and KZ.
Made with high strength resin.
Wide range of sizes available to order.
Used by professional teams and manufacturers.
Highly developed moulding technique, designed and manufactured in the UK.
Made to order in our UK headquarters.
For best results we recommend pairing this seat with one of our Tillett P1 rib protectors, see optional product list below.
Most chassis use a standard setup which includes additional upper seat stays. If these are not to be used, it is recommended tofit the TK7 Seat support plates on the main upper stay points.
