Complete TonyKart LN Lando Rotax Evo kartChassis will be a good used year old chassis checked and straight in workshop.Fitted with a new Rotax Evo engine senior or juniorRotax Evo max 125cc engine junior or seniorOTK seat size 1-4 fittedMXJ wheelsExide batteryGmax chain and sprocket setKart will be fully assembled in work shop.
Complete TonyKart Lando Rotax Evo kartTonyKart rolling chassisRotax Evo max 125cc engine junior or seniorOTK seat size 1-4 fittedMXJ wheelsExide batteryGmax chain and sprocket setKart will be fully assembled in work shop.
This is the latest and most refined evolution of the Racer, the 401T. With a new livery but with unchanged chassis geometry is made up with chrome molybdenum 30mm tubing.
Complete TonyKart Rotax Evo kartChassis will be a good used year old chassis checked and straight in workshop.Fitted with a new Rotax Evo engine senior or juniorRotax Evo max 125cc engine junior or seniorOTK seat size 1-4 fittedMXJ wheelsExide batteryGmax chain and sprocket setKart will be fully assembled in work shop.
Complete TonyKart Rotax Evo kart
Chassis will be a good used chassis checked and straight in workshop.Fitted with a new Rotax Evo engine senior or juniorRotax Evo max 125cc engine junior or seniorOTK seat size 1-4 fitted MXJ wheelsExide batteryGmax chain and sprocket setKart will be fully assembled in work shop.
New Complete TonyKart Kosmic Rotax Evo kartKosmic rolling chassisRotax Evo max 125cc engine junior or seniorOTK seat size 1-4 fittedMXJ wheelsExide batteryGmax chain and sprocket setKart will be fully assembled in work shop.
Complete TonyKart Rotax Evo kart
Chassis will be a good used chassis checked and straight in workshop.Fitted with a new Rotax Evo engine senior or juniorRotax Evo max 125cc engine junior or seniorOTK seat size 1-4 fitted MXJ wheelsExide batteryGmax chain and sprocket setKart will be fully assembled in work shop.
2025 401T KOSMIC Chassis.
Direct from factory team.
Weald on the bearing carrier done by are frame builder.
Fitted with new - MXJ Wheels Chain guard OTK Seat
Can Ship if needed and build into a full kart with new engine .
NextKarting - 01763 448200
2025 401T TonyKart Chassis.
Direct from factory team.
Weald on the bearing carrier done by are frame builder.
Fitted with new - MXJ Wheels Chain guard OTK Seat
Can Ship if needed and build into a full kart with new engine .
NextKarting - 01763 448200
2024 1 Race old KosmicTonyKart Chassis
Chassis has only done 1 race last year then has just been in storage at the team and is no longer needed as the team are now using the 2025 chassis. Fitted with new - MXJ Wheels Full sticker kit Chain guard.
This would have been one of the very last 2024 chassis made.
2024 1 Race old KosmicTonyKart Chassis Chassis has only done 1 races last year then has just been in storage at the team and is no longer needed as the team are now using the 2025 chassis.This is one of the very last 2024 chassis made. Fitted with new - MXJ Wheels Full sticker kit Chain guard
Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
Complete TonyKart Rotax Evo kart
Fitted with a new Rotax Evo engine senior engine has done 4 hours from last build and is a x strawberry racing team engine with all the latest updates fitted. Fitted new - MXJ wheels Exide battery Gmax chain and sprocket set and OTK seat
Next day delivery
Mid weeks Monday to friday we offer next day delivery if the product is on stock and exceptions on holidays.
Weekends We offer no deliveries in the weekends.
International Depending on where you’re located, we offer next day delivery. Check status on this link
2025 401T TonyKart Chassis.
Direct from factory team.
Fitted with new - MXJ Wheels Chain guard OTK Seat
Can Ship if needed and build into a full kart with new engine .
NextKarting - 01763 448200
NEW TONY KOSMIC 950MM CHASSIS
COMES WITH ALL THE ORIGINAL OTK PARTS 30MM AXLE,FULL ADJUSTABLE CASTER CAMBER KIT AND MORE.
WITH A NEW ROTAX MAX MICRO OR INTER UK EVO ENGINE 6 MONTHS WARRANTY COVER ON ENGINE.
ALSO INCLUDED NEW BATTERY,CHAIN AND SPROCKET FITTED ON KART,PRICED WITH OUT TYRES BUT HAPPY TO FIT NEW OR USED AS NEEDED.
TOP COMPONENTS
In a category such as MINI, in which victory is often a matter of thousandths of a second, a continuous refinement of every single component of the kart is absolutely necessary. The work of the OTK Kart Group R&D department and the Tony Kart Racing Team has therefore led to the development, for the Rookie chassis, of the new BMT4 spindles, combined with 235 mm steering rods. Next to these new parts we find the new hubs, now in magnesium, available for both front and rear axles, and a new chain tensioner, in aluminum, fixed to the bearing bracket.M9 Fairing Kit
MAXIMUM AERODYNAMIC EFFICIENCY
The Tony Kart Rookie is equipped with the M9 fairing kit, made up of the innovative front spoiler and front fairings, strongly inspired by the M11 model reserved for the Junior/Senior classes. On the other hand, the side bumpers and rear protection, part of the M8 kit introduced with the previous homologation, remain unchanged. As for the “adult” version, the whole set of fairings is then decorated with the new designed stickers, but still faithful to the identity of the brand of Prevalle. Attention to detail at the aerodynamic level is evidenced by the introduction of a new integral floorplate, able of reducing vortex and turbulence a in an area particularly subject to these phenomena.BSM5 Brake System
OPTIMIZED BRAKING
To meet the specific needs of the MINI categories, OTK Kart Group's R&D department, in cooperation with the Tony Kart Racing Team, implemented innovative solutions to improve braking on both EVS and EVM versions, updating the already well-known BSM5 brake system with new brake pads named 4A and a 149 mm floating disc.
Complete TonyKart Rotax Evo kart
Chassis will be a good used chassis checked and straight in workshop.Fitted with a new Rotax Evo engine senior or juniorRotax Evo max 125cc engine junior or seniorOTK seat size 1-4 fitted MXJ wheelsExide batteryGmax chain and sprocket setKart will be fully assembled in work shop.
Complete Kosmic 950 MM Rotax Evo kart
Chassis will be a good used year old chassis checked and straight in workshop.Fitted with a new Rotax Evo engineRotax Evo max 125cc engine junior or seniorOTK mini seat fittedAXJ wheelsExide batteryGmax chain and sprocket setKart will be fully assembled in work shop.
The new MY25 Tony Kart KOSMIC 950 mini rolling chassis.
TOP COMPONENTS
In a category such as MINI, in which victory is often a matter of thousandths of a second, a continuous refinement of every single component of the kart is absolutely necessary. The work of the OTK Kart Group R&D department and the Tony Kart Racing Team has therefore led to the development, for the Rookie chassis, of the new BMT4 spindles, combined with 235 mm steering rods. Next to these new parts we find the new hubs, now in magnesium, available for both front and rear axles, and a new chain tensioner, in aluminum, fixed to the bearing bracket.M9 Fairing Kit
MAXIMUM AERODYNAMIC EFFICIENCY
The Tony Kart Rookie is equipped with the M9 fairing kit, made up of the innovative front spoiler and front fairings, strongly inspired by the M11 model reserved for the Junior/Senior classes. On the other hand, the side bumpers and rear protection, part of the M8 kit introduced with the previous homologation, remain unchanged. As for the “adult” version, the whole set of fairings is then decorated with the new designed stickers, but still faithful to the identity of the brand of Prevalle. Attention to detail at the aerodynamic level is evidenced by the introduction of a new integral floorplate, able of reducing vortex and turbulence a in an area particularly subject to these phenomena.BSM5 Brake System
OPTIMIZED BRAKING
To meet the specific needs of the MINI categories, OTK Kart Group's R&D department, in cooperation with the Tony Kart Racing Team, implemented innovative solutions to improve braking on both EVS and EVM versions, updating the already well-known BSM5 brake system with new brake pads named 4A and a 149 mm floating disc.
