Products
-
Rotax 11 TOOTH BUSH REPLACEMENT TOOL
11 TOOTH BUSH REPLACEMENT TOOL TO REPLACE ROTAX SPROCKET DRUM BUSH.
£24.00 excl VAT | £28.80 incl VAT -
Dunlop 25MM X 52MM AXLE BEARING
25MM X 52MM AXLE BEARING
£5.99 excl VAT | £7.19 incl VAT -
Dunlop 30MM X 62MM AXLE BEARING
30MM X 62MM AXLE BEARING
£7.99 excl VAT | £9.59 incl VAT -
Rotax 42MM CARB FLANGE
EVO & NON EVO CARB FLANGE
£43.90 excl VAT | £52.68 incl VAT -
Gmax 50MM AXLE KEY
50MM AXLE KEY
£3.00 excl VAT | £3.60 incl VAT -
Rotax 51mm CARB FLANGE CLAMP
51mm CARB FLANGE CLAMP
£1.85 excl VAT | £2.22 incl VAT -
ACF50 Anti-Corrosion Spray Rust Prevention Protection
We have used ACF50 now for the last few years in the work shop and the lads fefer to it as "magic spray" amazing for removing rusted on nuts and bolts ect. Imagine a world without corrosion! Just think, no rust, less maintenance, cleaner engines, greater reliability, higher residual machine value. How much easier things would be! Now imagine a highly sophisticated, non-toxic, active, thin film water-displacing compound. A compound with salt blockers and corrosion inhibitors that stays active for up to 12 months. A lubricant so advanced that it is approved for electrical components (40Kv dielectric yet NO electrical contact resistance). A product that will stop existing corrosion as well as preventing it from starting. A product that was developed to help jet aircraft stay airborne. As close to ZERO CORROSION as nature will allow.
£11.45 excl VAT | £13.74 incl VAT -
AIM AIM ACC3 Analogue CAN Converter (4m Cable Length) - 4 x 719 Analogue Harness
AIM ACC3 Analogue CAN Converter (4m Cable Length) - 4 x 719 Analogue Harness Enhance your data analysis on the track with the AIM Motorsport Analogue CAN Converter (ACC). This reliable tool efficiently converts data from up to four analogue channels at a max rate of 1 kHz each. It is fully compatible with AIM Data loggers / dash loggers including the hugely popular Solo2 DL, as well as the MyChron6 kart dash/logger. Offering accurate and detailed data for your racing needs. Key Features and Benefits: Four-Channel Analogue to CAN Conversion: Enabling the monitoring of multiple sensor inputs simultaneously at a high frequency, this feature is crucial for fine-tuning performance, resulting in enhanced vehicle setup and more informed driving strategies. Compatibility with AIM Data/Dash Loggers: Seamlessly integrating with some of the market's most popular dash loggers and data loggers, it offers a straightforward setup, leading to a more efficient data acquisition process. Dedicated 4-Channel Split Harness: Simplifying installation with a dedicated accessory, the included harness reduces setup time and ensures a reliable connection for quicker, more accurate data analysis. Race Studio 3 Software Integration: Easy setup and modification of channels through this software. This feature offers user-friendly customization, leading to tailored data collection aligned with specific racing needs. Compact and Lightweight Design: With dimensions of only 44 x 38 x 19.8mm and a weight of 50g, its minimal impact on vehicle dynamics ensures performance isn't compromised, making it an ideal addition to any racing setup. Waterproof to IP65 Standards: This feature guarantees reliability in various racing conditions, offering consistent performance and durability, and providing peace of mind during critical racing moments. The AIM Motorsport Analogue CAN Converter stands out for its ability to deliver precise, high-frequency data, crucial for optimising vehicle performance and driving strategy. Its compatibility with AIM dash / data loggers and Solo2 DL, combined with easy installation and customisation features, make it an invaluable tool for serious racers. The lightweight, waterproof design ensures reliability and durability, contributing to its overall efficiency and effectiveness in the competitive world of racing. If you're looking to enhance your racing intelligence and gain a competitive edge, the AIM Motorsport Analogue CAN Converter is an essential addition to your toolkit. Its advanced features and benefits are tailored to meet the demands of modern racing, ensuring you stay ahead of the curve. Consider incorporating this technology into your setup for a more informed, precise, and successful racing experience.
£250.00 excl VAT | £300.00 incl VAT -
AIM AiM Data Hub 4 CAN Inputs 40cm Cable CAN-M-40
AiM Motorsport Four Way Data Hub / CAN Connection Multiplier - 40cm CAN Cable The compact Data Hub, provides four additional CAN channels and works as an interface between the AIM Logger and its peripheral equipment / accessories (i.e. LCU-One S Lambda Controller, GPS09 Module, MyChron Expansion, Memory Key and SmartyCam HD cameras). The acquisition of all essential data you need to evaluate your car performance needs the connection of many accessories to your datalogger. This implies the presence of a great number of cables but the Data Hub takes all the information you need sent to your logger with only one cable, minimising wires overall. More Data Hubs can be connected in sequence in order to increase the number of peripherals which can be connected. The Data Hub is available in two versions: Four Way Data Hub: recommended for data / dash loggers (MXL/MXL2/MXG/MXS/EVO4) which are powered from the vehicles 12v on-board battery supply. Available with a 40 or 150cm CAN cable. Two Way Data Hub (with external power connection):recommended for MyChron6. MyChron5 (and the older MyChron4) kart data logger which uses an internal battery. This data hub allows for the use of an external battery source instead of drawing power from the MyChron dash. Available only with a 40cm CAN cable. External 12v power lead 150cm length.
£65.00 excl VAT | £78.00 incl VAT -
AIM AIM MYCHRON 2T + WATER M10 SENSOR
AIM MYCHRON 2T + WATER M10 SENSOR
£520.00 excl VAT | £624.00 incl VAT -
AIM AIM MYCHRON 4 + 5 AIR TEMP SENSOR SHORT
AIM MYCHRON 4 + 5 AIR TEMP SENSOR SHORT
£70.00 excl VAT | £84.00 incl VAT -
AIM AIM MYCHRON 4 + 5 LEAD / PATCH CABLE
The AiM 712-719 MyChron5 temperature sensor 712-719 3 pin patch lead. Key Features : 712-719 patch lead 3 pin male to female High-quality connectors
£40.00 excl VAT | £48.00 incl VAT -
AIM AIM MYCHRON 4 + 5 M10 AIR TEMP SENSOR + LEAD
The AiM 10mm Under Spark Plug is suitable for all MyChrons 4 & 5 S 2T. It is required to measure the cylinder head temperature of your Kart. Also comes with a TC Yellow to 712 3 pin patch lead. Key Features : Measure engine temperature TC yellow -712 3 pin patch lead 10mm diameter 2 pin Mignon connection
£115.00 excl VAT | £138.00 incl VAT -
AIM AIM MYCHRON 4 + 5 M10 WATER TEMP SENSOR
AIM MYCHRON 4 + 5 M10 WATER TEMP SENSOR
£70.00 excl VAT | £84.00 incl VAT -
AIM AIM MYCHRON 4 + 5 M10 WATER TEMP SENSOR + LEAD - ROTAX
AIM MYCHRON 4 + 5 M10 WATER TEMP SENSOR AND PATCH LEAD FOR ROTAX ENGINES
£115.00 excl VAT | £138.00 incl VAT -
AIM AIM MYCHRON 5 / 6 STEERING WHEEL BLACK
AIM MYCHRON 5 / 6 STEERING WHEEL BLACK
£165.00 excl VAT | £198.00 incl VAT -
AIM AIM MYCHRON 5 BATTERY
AIM MYCHRON 5 BATTERY
£50.00 excl VAT | £60.00 incl VAT -
AIM AIM MYCHRON 5 BATTERY CHARGER CABLE
AIM MYCHRON 5 BATTERY CHARGER CABLE
£3.50 excl VAT | £4.20 incl VAT -
AIM AIM MYCHRON 5 BATTERY CHARGER DOCK
AIM MYCHRON 5 BATTERY CHARGER DOCK
£50.00 excl VAT | £60.00 incl VAT -
AIM AIM MYCHRON 5 PORT SEALING CAP / BLACK
AIM MYCHRON 5 PORT SEALING CAP / BLACK ALLOY
£3.99 excl VAT | £4.79 incl VAT -
AIM AIM SOLO 2
AIM SOLO 2The Aim Solo 2 GPS Car Racing Track Day Lap Timer is a completely automatic motorsport lap timer. It receives the data from two satellite constellations GPS and Glonass, which is a huge step forward since it is unbelievably faster and more precise than the previous version.The power ON requires only a few seconds and the lap times are calculated with a max 2/100 sec of tolerance.
£350.00 excl VAT | £420.00 incl VAT -
Rotax AIR VENT CAP / OIL FILLER CAP
AIR VENT CAP / OIL FILLER CAP
£2.08 excl VAT | £2.50 incl VAT -
Alfano Alfano 6 GPS Lap-timer Mount
ALAFANO 6 GPS Lap-timer Mount
£10.00 excl VAT | £12.00 incl VAT -
Gmax ALFANO 6 PORT SEALING CAP / BLACK
ALFANO 6 PORT SEALING CAP / BLACK ALLOY
£3.99 excl VAT | £4.79 incl VAT
You have seen 24 out of 1130 products